User Reviews

Published LessLoss Reviews Now Number Over 695

Show all
Because of the sheer number of reviews, you can sort them above to quickly find LessLoss products of interest.

Power Distributor; Firewall Module; C-MARC bulk wire and cable

Date Added: 10/18/2022 by Philippe Montavon
My audio system is a highly sensitive and very transparent one, using very high sensitivity field coil full range speakers and also field coil bass speakers. The tube amplifier that drives the full range speakers (Rullits) offers only about 3 Watts. So, my description of the effects of the 640x Firewalls pertains to a high sensitivity (including high hum sensitivity) tube driven system.

It has been optimised over the years with much dedication, including the use of Firewalls for loudspeakers and Firewalls for power supply. So, I was not expecting such a range of improvements upon implementing this home-made power distributor using one DIY 640x Firewall per power cable (8 Firewalls for 8 power cables). I might even consider building a second distributor to take care of the remaining power cords!

I believe that the use of one Firewall per power cord minimises detrimental electrical interactions between the various pieces of equipment, which clearly translates into less hum and a clearer musical signal.

I finalised my 8 channel power distributor using 8 of your DIY 640x Firewalls, one per channel/output. I use one power transformer (connecting 400V from the 3 phase electrical supply of my flat to its primary, which translates to 230V on its secondary) to feed my entire audio system and achieve galvanic separation.

Grounds proceed via separate connectors, one on each piece of equipment of my system (implemented by me), which, through C-MARC wires, converge onto a single soldering point and then travel through two 640x Firewalls before being connected to earth.

Accordingly, since the grounding network of the system is fully separate from Line and Neutral, I did use Ground and Neutral of the 640x Firewalls in parallel to account for Neutral. Line was used as usual.

I powered all digital related equipment, part of the tube gear, and part of the field coil power supplies with this power distributor. There are still about 8 pieces of equipment which are not powered by this DIY 640x power distributor. Some of the pieces of my system already housed a DIY 640x, internally connected to the primary of the respective power transformers.

Listening to the system after implementation was a great pleasure. The already low hum level of this complex system went even lower, nearly undetectable! Depth and width of the musical stages increased. Unknown low level information appeared, which also translated into increased harmonic richness of instruments and voices and an increased dynamic range.

Acoustics of the recording space became more obvious, which revealed the three dimensional structure of the musical scenery. That means a lot when considering the pleasure it conveys when listening to music!!!

So, great stuff indeed.
CloseRead the reviewProduct details

LessLoss History From the Very Beginnings

LessLoss started its business on Audiogon in late 2007. Within the first couple of month, word about LessLoss spread like wildfire among Audiogon members. Here is the feedback received from our clients during our first year of operation. This is from even before we had our own website.

Louis is one of the best in the business, truly professional and very fast production and delivery. I am very satisfied by your superb service. Many thanks.

Positive by Buyer Sebastian (135) on 07-29-2008

Excellent transaction with Lessloss on dynamic filtering power cord. Good communications & fast shipping. A+++++

Positive by Buyer Sennett (45) on 07-03-08

Bought 3 pc's from Liudas in Jan/08. Outstanding product as advertised. Performance is everything and more than I expected. Kudos to Lessloss cable for a great product. Very highly recommended...A+++

Positive by Buyer Phillykid (33) on 06-19-08

Read feedback