Update on the pending Early Bird launch of Firewall Robusto™
Dear esteemed clients,
Here's some more information on the pending Early Bird launch of our greatest Firewall DIY yet, Firewall Robusto™.
General description and applications
It will come as a single module with a single input and output end. It can be used in hierarchical order of performance enhancement, starting with the Live or positive line, then also on the Neutral or negative (return) line, and finally, also on the Ground line. It can be used on both AC and DC, high voltage or low voltage applications.
You can then also choose to daisy chain these together for even more unbelievable performance enhancements.
Conductivity is large, at 6mm^2 conductive cross section in a single, Entropic Process copper bar, so it does not in the least impact dynamic clarity in any application. We're talking a current carrying capacity of 32 to 40 Amperes, or 7-9 kW of power, so there's absolutely no worries there even in very power hungry applications.
Size and weight
Length of the module's encasing: 89mm
Copper bar extension at each end of the module's encasing: 15.5mm
Width of the module: 36mm
Height of the module: 33mm
Weight of the module: 312 grams
How it fits in with our Firewall DIY family of products
Firewall Robusto™ replaces both the Firewall for Loudspeakers DIY version, dual, and the Firewall for Loudspeakers DIY version, quad. It dwarfs their performance, obviously and undeniably, from the very first note.
Each unit will have laser engraved insignia with a direction arrow as in the image below:
Directionality
The arrows are to be interpreted as follows:
For Live or positive line: Source --> Load.
For Neutral or negative line: Load --> Source.
For Ground line: Equipment --> Building Ground.
Installing these on ground lines is not to be underestimated. The drop in noise floor is immense! However, the very best start in application is to begin with the Live or positive line, then the Neutral or negative (return) line, then the Ground line.
Weight considerations
The new Firewall Robusto™ is too heavy to be used in dangling Plug-and-Play applications, such as our Plug-and-Play Firewall 640x products. As such, it is intended for use only in stand-alone solutions which lie on a rack or on the floor.
Cumulative performance
The cumulative effects of our Firewall technology are in no way compromised by adding Firewall Robusto™ to a system already outfitted with our Plug-and-Play dangling Firewall 640x modules, not even the Stellar 640x model. The sky is the limit here, but the leap forward in performance from the Firewall Robusto™ is jaw-dropping to say the least! Installing these in loudspeakers or as a stand-alone module outside your speakers, or inside your amps (if you have room), radically improves performance. The control and clarity seem to defy the possible. This is an incredible achievement we can't wait to get into your hands!
Thank you for following our latest developments here at LessLoss. We'll be launching Firewall Robusto™ with a very attractive Early Bird offer, so please, don't miss it!
Best regards,
Louis Motek
---
LessLoss Audio